AH-64DField Manual v3.0

Displays

Multipurpose displays (MPD)

The MPDs are the primary means of interacting with and configuring aircraft systems. Bezel pushbuttons, pushbutton types, the MPD cursor and the page index.

PLTCPG

Bezel

T1 M B1 T2 B2 T3 B3 T4 B4 T5 B5 T6 B6 L1 R1 L2 R2 L3 R3 L4 R4 L5 R5 L6 R6 FCR WPN COM VID TSD A/C ADF ASE TSD WPN FCR M I S S I O N SOI SINC HQ2 XPNDR UTIL COM C O M U N I C A T I O N S VIDEO VCR MSG SEND DMS ENG FLT FUEL PERF UTIL AIRCRAFT

The MENU page. Labels with a dark bar under them are not simulated.

The MPDs are the primary means of interacting with and configuring aircraft systems. Each display has 24 variable action buttons (VABs) arranged around the bezel in groups of six. Buttons are referenced by their location around the MPD as top (T), right (R), bottom (B) and left (L), numbered left to right and top to bottom: T1–T6, R1–R6, B1–B6, L1–L6. The function of each VAB is set by the page and specified by the adjacent display text label.

The fixed action buttons (FABs), or subsystem buttons, and the Menu (M) button perform the same function on every page:

Button Function
M MENU page (in the B1 position)
FCR FCR page
WPN WPN page
TSD TSD page
A/C ENG page; pressed again on the ENG page, the FLT page
VID VIDEO page
COM COM page (not simulated)

The BRT and VID controls and the DAY/NIGHT/MONO knob are not simulated.

Pushbutton types

Marking Pushbutton
Arrow above the label Page pushbutton: selects a page
Partial intensity barrier beside the label Not selectable in the current operating mode
Right-facing chevron (>) Data entry pushbutton: enters data with the KU
Filled or open dot beside the label On/Off pushbutton: filled is on, open is off
Box around the label Selected option. On the aircraft pages, the boxed page pushbutton is the page presented, and pressing it returns to the ENG page.

Green indicates normal and advisory conditions; yellow, cautions and hazards; red, warnings and enemy threats; white, attention, such as an empty fuel cell; cyan, friendlies and the sky of the attitude indicator; brown, the ground of the attitude indicator. Partial intensity de-emphasizes normal conditions.

MPD cursor

Each crew station has its own MPD cursor, a green ring with four spokes, which moves over that crew station’s two MPDs. It selects buttons and selects symbols on the TSD and FCR pages. Its bindings are in AH-64D Official Project:

Binding Function
MPD Cursor: Up / Down / Left / Right Moves the cursor; speed increases with stick deflection and with time held.
MPD Cursor: Enter Presses the button whose label is under the cursor, or acts on the symbol under it.
MPD Cursor: Display Select Moves the cursor to the center of the other MPD.
  • Buttons: with the cursor on a label, the label is displayed bold; Enter presses the button, and holding Enter holds it. A button without a label can be pressed at its position on the MPD edge.
  • Pages: over the TSD map or the FCR scan area the cursor is displayed as a white X. The function of Enter there is described on the TSD and FCR pages.
  • Changing MPD: the cursor moves to the other MPD when it is pushed against the inner edge, released and pushed again. On an MPD that is off, it moves to the other MPD.
  • Stowing: three minutes after last use, the cursor moves to the lower left corner, unless it rests on a label or a TSD or FCR symbol.

The cockpit mouse cursor does not move the MPD cursor.

Pressing buttons

Buttons are pressed with the cockpit cursor (Controls and bindings) or a direct binding: every button on both MPDs in both crew stations has a binding in AH-64D Official Project: Cockpit Controls (left mpd: left mpd t1, right mpd: right mpd fcr and so on).

Each MPD retains its page, and each page retains its settings. MPD page selection is crewstation independent; aircraft data is aircraft common, so a waypoint added on the pilot’s TSD is displayed on the CPG’s.

Pages

Edit this page Written for v3.0 · Not affiliated with Boeing or the US Army