Displays
Data management (DMS) pages
The DTU page, which loads mission data into the aircraft, and the VERS page, which verifies the mod’s software versions.
DMS is selected from the MENU page. The DMS pages have the same page buttons: T1 DTU, T3 IBIT (the MPD games, a mod feature), T5 VERS, and B6 WCA for the WCA page. B1 returns to the MENU page.
The DMS FAULTS and ADVISORIES lists, FAULT and UTIL are not simulated.
DTU
The data transfer unit page. The right MPD displays it at power-up.
| Button | Label | Function |
|---|---|---|
L1 |
MASTER LOAD |
Loads the mission data, and any DTC, into the aircraft. The page displays the load in progress, then complete after approximately four seconds. L1 again returns. |
MASTER LOAD performs the following, in order:
- Copies every waypoint, hazard, control measure and target placed in the editor (Mission editor) into the aircraft, replacing the points held.
- If a DTC has been uploaded to the aircraft from the mission planner for the current map, loads it over the mission data: its lines, areas and zones, and its points and routes. A DTC with no points of a type, or no routes, leaves the mission’s data in place.
The points are then displayed on the TSD and available for routes.
MASTER LOAD replaces the aircraft’s points, including points added in the cockpit. Mission data is loaded before routes are built.
DATA, WEAPONS/SIGHTS, the right-hand list, WP, SP and DP are not simulated.
VERS
The version page (mod feature) lists every PBO of the mod with its build.
- A PBO from the same build as the rest is displayed normally.
- A PBO from a different build, or a missing PBO, is highlighted; a missing PBO displays
????????in place of the build.
Any difference raises the VERS MISM advisory when the aircraft is spawned; selecting this page clears it. A mismatch indicates the mod is not installed or updated correctly: the files are verified in Steam, or the release is reinstalled. B2 and B3 page through the list.